makerbot Build material

EXPERIMENT WITH DUAL EXTRUSION

 

  • Optimized to be the best filament for MakerBot Replicator Desktop 30 Printers.
  • Every filament color is comprehensively quality tested at both high (100 micron) and medium (200 micron) layer resolutions to verify that the filament will perform every feature that MakerBot MakerWare software offers and will reliably slice and print every type of printing (tight corners, long and short overhangs, floors, ceilings e).
  • Every filament color also undergoes long duration testing using a large 30 model that

requires18- 24 hours of print time to ensure that there are no deviances in print quality.

  • Every millimeter of MakerBot Filament has been subjected to stringent laser testing.
  • High viscosity to prevent dripping from the extruder nozzle.
  • Packaged on spools to prevent tangles and “bird nests.”

 

MAKERBOT3 PLA FILAMENT

 

  • MakerBot PLA Filament is the best, most consistent build material for MakerBot Replicator@Desktop 30 Printers.
  • Bioplastic derived from corn.
  • Consistently round diameter – ensures highest print quality and consistent flow through the extruder nozzle.
  • Prevents shredding.

MAKERBOT3 ABS FILAMENT

 

  • MakerBot ABS Filament is the best, most consistent, and most tested ABS filament for MakerBot Replicator 2X Experimental 30 Printers.
  • Can be used with MakerBot Dissolvable Filament. MakerBot dissolvable filament acts as a solid infill material.

 

MAKERBOT3 TOUGH PLA FILAMENT

  • Greater durability than PLA -which means it can flex more than PLA before it breaks
  • Warps less than ABS, which makes for more reliable print results
  • Similar tensile, impact, and flexural strength to ABS

MAKERBOT3 DISSOLVABLE FILAMENT

 

  • MakerBot Dissolvable Filament is the best, most consistent, and most tested dissolvable filament for MakerBot Replicator 2X Experimental 30 Printe
  • MakerBot Dissolvable Filament is the best, most consistent, and most tested dissolvable

filament for MakerBot Replicator 2X Experimental 30 Printers.

  • An excellent dissolvable support structure for MakerBot ABS Filament designed for use as a solid infill materia
  • Easily dissolves in limonene bath in just 8-24 hours.

 

material properties